500 MCQ of Turner Trade / Turner MCQ PDF / Turner Question Paper PDF / Turner Sample paper / Turner Model Paper

 500 MCQ of Turner Trade

TRADE TURNER

1 st and 2nd semester multiple choice question and answer

1. Which one of the following is not a part of the centre lathe?
(a) Saddle
(b) Feed rod
(c) Arbor
(d) Lead screw

2. The headstock of a lathe is situated at the
(a) Right-hand end of the lathe bed
(b) Left-hand end of the lathe bed
(c) Middle of the lathe bed
(d) Bottom of the lathe bed

3. The horizontal feed, cross feed and screw cutting movement in a lathe is controlled by
(a) Headstock
(b)Tailstock
(c) Cross-slide
(d) Apron

4. A face plate is held at
(a) Headstock spindle
(b) Tailstock
(c) Tool post
(d) Bed

5. Tumbler gear quadrant is used for
(a) Increasing the speed of the spindle
(b) Decreasing the speed of the spindle
(c) Changing the direction of rotation of the lead screw
(d) Changing the direction of the spindle

6. In a gap bed lathe, the gap is provided
(a) Just below the nose of the headstock spindle
(b) Just below the spindle of the tailstock
(c) In the middle of the bed
(d) Anywhere in the bed

7. While drilling in lathe, the drill is held in the
(a) Headstock
(b) Tailstock
(c) Compound rest
(d) Bed

8. Back-gear mechanism is provided in cone pulley headstock to
(a) Reduce the speed of spindle
(b) Increase the speed of spindle
(c) Reverse the speed of spindle
(d) Transmit power from spindle gear to stud gear

9. Lathe bed is made of
(a) Mild steel
(b) Cast iron
(c) High carbon steel
(d) High alloy steel

10. To prevent lathe bed guideways from damaging by chuck while mounting
(a) Take the help of the supervisor
(b) Support it with screw jack
(c) Lift it with hand crane
(d) Place a wooden piece on the guideways

File Details :

Language : English

Pages : 88

Questions : 500

Size : 509.6 kb

🆓Download PDF file Now

Click on Download button👇

YouTube channel 👉

https://www.youtube.com/channel/UCkDmF8H_gJXANtl9HAH7KyA

Telegram group 👉